Attach the horn or head lamp HID make more current load. In the motor system of parallel fuses as Kawasaki Ninja 250R be adjusted between load and capacity of fuse used.Capacity marked on the outside of the fuse to be easily identified by color. "If the electric current that flows is greater than the capacity, will cause the fuse to melt metals or even be broken," said Risa Rismawan, mechanical Pro Tuner.
Before determining how many amps a fuse that should be used, must be aware of the current flowing in advance. That could use the formula: I = P / E. Where I = Strong Current (amperes), P = Power (watts) and E = Voltage (Volt).
"However, to calculate the capacity of the fuse to be used should take into account the safety factor of two times of the above formula," explained the mechanics of Jl. Imam Bonjol No. 382C, Denpasar, Bali
Suppose on the Ninja, 55 watt lamp power and current flows ranged from 13.8 to 14.8 watts. Then I = 55/14, 8 x 2 = 7.432 amperes.
Because the fuse on the market 7.5, 10, 15, 20, 25 and 30. While Ninja 250R use 10 amps, so it is still safe. Different again if the change is greater wattage lamps or HID with great power, must replace the fuse corresponding load.
Suppose the pairs of 85 watt HID. "If you use the formula will need a fuse 11.48 amperes to 15 amperes or rounded according to the available on the market."
Before determining how many amps a fuse that should be used, must be aware of the current flowing in advance. That could use the formula: I = P / E. Where I = Strong Current (amperes), P = Power (watts) and E = Voltage (Volt).
"However, to calculate the capacity of the fuse to be used should take into account the safety factor of two times of the above formula," explained the mechanics of Jl. Imam Bonjol No. 382C, Denpasar, Bali
Suppose on the Ninja, 55 watt lamp power and current flows ranged from 13.8 to 14.8 watts. Then I = 55/14, 8 x 2 = 7.432 amperes.
Because the fuse on the market 7.5, 10, 15, 20, 25 and 30. While Ninja 250R use 10 amps, so it is still safe. Different again if the change is greater wattage lamps or HID with great power, must replace the fuse corresponding load.
Suppose the pairs of 85 watt HID. "If you use the formula will need a fuse 11.48 amperes to 15 amperes or rounded according to the available on the market."
0 Response to "Birthday setting Kawasaki Ninja 250R Fuses Watt At Large"
Post a Comment
semua tulisan dan postingan yang ada di blog ini bukan tanggung jawab admin,